How to Seal a Wood Gun Stock


The wood gun stock is the main body of a firearm and it needs to be well sealed in order to protect it from the elements and keep it looking good. There are several ways to seal a wood gun stock, but the most common and effective method is to use a polyurethane finish. This type of finish will provide a durable, protective layer that will not only keep your gunstock looking good, but also help to prevent any damage that could be caused by moisture or other environmental conditions.

How to Seal the Wood When Finishing a Gun Stock | MidwayUSA Gunsmithing

  • Clean the wood gun stock with a damp cloth to remove any dirt or debris
  • Apply a thin layer of sealer to the wood gun stock using a paintbrush or sponge
  • Allow the sealer to dry for at least 24 hours before using the gun
How to Seal a Wood Gun Stock

Credit: www.birchwoodcasey.com

What Do You Seal Gun Stock With?

When it comes to finishing a gun stock, the options for sealants are pretty much endless. However, some sealants are better than others when it comes to durability and protection. Here are a few of the most popular options:

1. Polyurethane Sealer Polyurethane is one of the most popular finishes for gun stocks due to its high level of durability. It’s also pretty easy to apply, which makes it a good option for those who are new to finishing gun stocks.

Polyurethane will protect your stock from scratches, dings, and other wear and tear.

2. Lacquer Sealer Lacquer is another durable option for sealing a gun stock.

It’s also relatively easy to apply and gives your stock a nice shine. Lacquer will protect your stock from scratches and other minor damage, but it’s not as tough as polyurethane so it may not stand up to major wear and tear as well.

3. Shellac Sealer

Shellac is a natural resin that can be used as a sealant for wood surfaces like gun stocks. It’s highly durable and provides excellent protection against scratches, scuffs, and other damage. Shellac is also relatively easy to apply and gives your stock a beautiful lustrous finish.

What is the Best Finish to Put on a Gun Stock?

There are a few different types of finishes that can be applied to gun stocks, and the best one for you will depend on your personal preferences and the type of gun you have. Some popular options include lacquer, varnish, shellac, and tung oil. Each has its own advantages and disadvantages, so it’s important to do some research before deciding which one is right for you.

Lacquer is a quick-drying finish that is available in both glossy and matte finishes. It’s easy to apply and can provide a durable protective layer against scratches and nicks. However, it’s also susceptible to water damage and may yellow over time.

Varnish is another option that comes in both glossy and matte finishes. It takes longer to dry than lacquer, but it’s more resistant to water damage. It can also be buffed to a high shine if desired.

However, varnish may require more frequent reapplication than other finishes due to its lower durability. Shellac is a resin-based finish that dries quickly and produces a high-gloss finish. It’s resistant to alcohol and water damage, making it ideal for use on guns that will be exposed to harsh conditions.

However, shellac can be difficult to remove if you ever decide to change the finish on your gunstock. Tung oil is derived from the nut of the tung tree and has been used as a wood finisher for centuries. It penetrates deep into the pores of the wood, creating a hard surface that repels water and resists scratches.

Tung oil can take several days or weeks to fully cure, but the wait is worth it for the beautiful lustrous finish it produces.

Is Boiled Linseed Oil Good for Gun Stocks?

Yes, boiled linseed oil is good for gun stocks. It protects the wood from moisture and helps to prevent warping and cracking.

What Do You Put on a Wood Gun Stock?

Adding a personal touch to your gun stock can make it more enjoyable to shoot. It can also help improve your aim. Here are a few tips on what you can put on a wood gun stock:

One option is to add checkering. This will give you a better grip on the gun and help prevent your hand from slipping. You can do this yourself or have it done professionally.

Another option is to engrave your initials or other designs into the wood. This adds a unique look to the gun and makes it more personal. If you choose this route, be sure to use a sharp knife or chisel so you don’t damage the wood.

You can also add paint, stains, or varnish to the stock. This is a great way to change the color or protect the wood from moisture damage. Be sure to use durable paint that won’t chip or fade easily.

Finally, consider adding some type of padding to the stock. This will make it more comfortable to hold and help reduce felt recoil. There are many different types of padding available, so find one that suits your needs and preferences.

Conclusion

Assuming you would like a summary of the blog post titled “How to Seal a Wood Gun Stock”: The process for sealing a wood gun stock is actually quite simple and only requires a few supplies that can be easily found at any hardware store. The first step is to clean the stock with denatured alcohol to remove any oils or dirt that may be on the surface.

Once the stock is clean, sand it down using 120-grit sandpaper until the entire surface is smooth. Next, apply a thin layer of sealer to the stock using a cloth or brush and allow it to dry for 24 hours. Once the sealer has dried, apply another coat if necessary and then buff the stock with steel wool to give it a nice shine.

Recent Posts