Square Meters to Square Feet Calculator
Multiply square meters by 10.7639 to get square feet. Enter a value in either field and the other updates instantly.
Quick Answer
Multiply square meters by 10.7639 to get square feet. Enter a value in either field and the other updates instantly.
Square Meters to Square Feet Calculator
Enter your values below for an instant result, then see the formula, worked example, and common mistakes.
Enter a value in either field.
How to Use This Calculator
Type into either the square meters or square feet field — the other converts automatically.
For whole rooms or lots, measure length x width in one unit first, then convert the total area.
Many flooring and carpet products in the US are priced per square yard, not square foot.
Round up to the nearest full unit your supplier sells to avoid running short.
Formula
Square feet = Square meters x 10.7639. Square meters = Square feet / 10.7639.
Reference Table: Common Area Conversions
| Square meters | Square feet |
|---|---|
| 1 m2 | 10.76 ft2 |
| 5 m2 | 53.82 ft2 |
| 10 m2 | 107.64 ft2 |
| 20 m2 | 215.28 ft2 |
| 50 m2 | 538.20 ft2 |
Common Mistakes to Avoid
- Confusing square meters/feet (area) with linear meters/feet (length).
- Rounding too early and compounding small errors across a large area.
- Mixing up square yards and square feet when ordering flooring or carpet (1 sq yd = 9 sq ft).
- Not accounting for waste/cutting allowance when ordering flooring or panel materials by area.
When the Estimate May Be Wrong
This is a straightforward unit conversion, so the math itself does not vary. Real-world discrepancies usually come from inaccurate room measurements (irregular walls, alcoves) rather than the conversion factor.
FAQs
How many square feet is 1 square meter?
1 square meter equals about 10.7639 square feet.
How do I convert square feet back to square meters?
Divide the square feet value by 10.7639.
Is a square yard the same as a square meter?
No. 1 square yard is 9 square feet, while 1 square meter is about 10.76 square feet — they are close but not equal.
Sources and Methodology
This page uses the standard conversion factor 1 square meter = 10.7639 square feet (derived from 1 meter = 3.28084 feet, squared).
