Chamfering a hole in wood is a process of cutting away the sharp edges of a hole so that it is easier to insert a dowel or screw. The most common way to chamfer a spot is with a drill bit, but you...
Archives: Blog
Ironwood is a solid hardwood. It is often used in construction and furniture making. Ironwood is challenging to cut with hand tools, but it can be done with the right tools and techniques. Here are...
Miter saws come in all different sizes, and each size has its capabilities. So, what size miter saw should you use to cut 6x6 lumber? The answer may surprise you. You might think you need a large...
If you need to remove the riving knife from your Dewalt table, saw, there are a few things you'll need to do. First, you'll need to remove the throat plate. To do this, loosen the two screws holding...
“How to Cut a 65 Degree Angle With a Miter Saw: A Step-by-Step Guide”
To cut a 65-degree angle with a miter saw, you must set the blade to 65 degrees. You can do this by loosening the blade clamp and rotating it until it is at the desired angle. Once the edge is set,...
A crosscut sled is one of the most useful jigs for a table saw. It allows you to make precise, repeatable cuts and can be used for various projects. This article will show you how to build your...