Chicago Electric 63118 Table Saw Parts: Where to Find Them
The Chicago Electric 63118 is Harbor Freight’s 10-inch, 15-amp benchtop table saw (up to 4,800 RPM) — and Harbor Freight rarely stocks individual replacement parts for it once a model is discontinued. The real sources are their parts line for the few parts they do carry, plus eBay and generic 10-inch aftermarket parts for everything else (blades, brushes, belts fit by size, not by brand). This guide covers exactly where to look, which parts wear out first, and how to confirm a generic part actually fits.
What Is The Chicago Electric 63118 Table Saw?
The 63118 is a 10-inch, 15-amp benchtop table saw with an extra-wide die-cast aluminum table, a miter gauge for crosscuts, a rip fence, and built-in motor overload protection. It’s a Harbor Freight house-brand tool, which means parts availability depends entirely on Harbor Freight’s own parts department rather than a dedicated dealer network — the biggest practical difference from a Bosch, DeWalt, or Ridgid saw when something breaks. The same sourcing challenge applies to other house-brand 10-inch saws and to Chicago Electric’s miter saw lineup.
Where To Actually Find Replacement Parts
- Harbor Freight’s parts department first, for original parts: Search by item number or model number at harborfreight.com/parts, or call 1-888-866-5797. Be aware: for an older benchtop tool like the 63118, many parts shown in the manual’s exploded diagram are listed “for illustration only” and are not sold individually — this is the single most common frustration owners run into.
- The owner’s manual, for part numbers and the exploded diagram: The official manual (PDF, hosted by Harbor Freight) shows every part with its reference number — pull the exact part number before searching anywhere else, since generic listings rarely use Harbor Freight’s own naming.
- eBay, for discontinued original parts: Sellers part out retired units, so eBay is often the only source for saw-specific parts like the factory rip fence or table insert once Harbor Freight stops carrying them.
- Generic 10-inch aftermarket parts, for wear items: Blades, drive belts, and motor brushes are sized standards, not Chicago Electric-specific — a correctly sized replacement from Diablo, Freud, or a universal brush kit works regardless of brand, as long as the dimensions match your saw.
📊 Harbor Freight explicitly lists many exploded-diagram components as “for illustration only, not sold separately” on discontinued benchtop tools — Source: Harbor Freight parts department policy, referenced in current owner manuals for older Chicago Electric models.
The Parts That Actually Wear Out
- Blade: The most commonly replaced part — a dull or damaged 10-inch blade is sized the same as nearly every other 10-inch table saw, so any quality aftermarket blade with a 5/8-inch arbor fits.
- Carbon motor brushes: A documented wear item on this specific model — a worn brush causes sparking, stalling, or a motor that won’t start. Brushes sized for the 63118 are sold directly under this model number on Amazon and eBay.
- Miter gauge and rip fence: These loosen and lose accuracy over years of use before they actually break. A universal aftermarket miter gauge, like an Incra miter gauge (most fit a standard 3/8″ x 3/4″ miter slot), is often easier to source than the discontinued original.
- Drive belt: A cracked or slipping belt causes blade speed loss under load — replace by belt size (measured, not by part number) from any hardware store or generic belt listing.
- Table insert/throat plate: Wears from repeated blade contact on the zero-clearance edge; a generic 10-inch benchtop insert usually fits if the mounting tab dimensions match.
How To Confirm A Generic Part Actually Fits
- Pull the exact measurements first: Arbor size for blades (5/8″ is standard on most 10-inch saws), miter slot width and depth for gauges, belt length and width for drive belts.
- Cross-reference the manual’s part number, not just the description: A listing titled “table saw brush” means nothing without checking it against the brush dimensions or the OEM part number in the manual.
- Check listing photos against your saw’s actual mounting points before ordering — miter gauges and inserts vary in bar width and tab spacing even among “universal” listings.
- When unsure, call Harbor Freight’s parts line with your model and item number — they can confirm compatibility even when they can’t sell you the specific part.
“On a discontinued house-brand tool, the manual’s part number matters more than the product title on a listing — two ‘universal 10-inch throat plates’ can differ by a few millimeters in the mounting tab, which is the difference between a clean fit and one that rocks under the blade.”
Best 63118 Replacement Part Pick
Carbon Motor Brush for Chicago Electric 63118 Table Saw
Sized specifically for the 63118’s motor — the most commonly needed part when the saw stalls, sparks, or won’t start.
- Best for: a motor that sparks, stalls, or won’t start
- Why we picked it: listed specifically for this model, not a generic universal brush
- Main drawback: confirm your saw’s exact production run — Harbor Freight has revised this model over the years
Other commonly needed parts
 Option 1 Diablo 10-Inch 40-Tooth General Purpose Saw Blade
|
 Option 2 POWERTEC Universal Table Saw Miter Gauge (71142)
|
As an Amazon Associate we earn from qualifying purchases.
Maintenance That Cuts Down On Part Replacement
- Clear sawdust from the motor housing and blade area regularly — packed dust is a common cause of premature brush and belt wear.
- Check blade and miter gauge alignment periodically; a saw that’s cutting out of square puts extra strain on the fence and gauge mounting hardware — a featherboard also reduces wear on the fence by keeping consistent pressure on the workpiece.
- Store the saw covered or indoors — rust on the table surface and fence rails is one of the most common reasons benchtop saws from this price tier need parts replaced early.
Frequently Asked Questions
Is The Chicago Electric 63118 Table Saw Still Available?
Harbor Freight periodically rotates its Chicago Electric benchtop lineup, and the 63118 has been listed under this item number for years, but availability varies by store and over time. Check harborfreight.com directly by item number for current stock, or call a local store.
Where Can I Get The Manual And Parts Diagram For The 63118?
Harbor Freight hosts the official owner’s manual, including the exploded parts diagram with reference numbers, on their manuals site. Search by item number 63118 — the manual is the most reliable source for confirming exact part numbers before ordering a replacement anywhere else.
Can I Use A Generic Blade Or Belt Instead Of An Original Chicago Electric Part?
Yes, for sized-standard wear parts like blades, belts, and brushes — these aren’t proprietary to Chicago Electric. A 10-inch blade with a 5/8-inch arbor, a belt matched by measured length and width, or a brush matched by dimensions will work regardless of brand.
What Should I Do If Harbor Freight Doesn’t Sell The Part I Need?
Check eBay for parted-out units first, since original rip fences, table inserts, and gauge assemblies for discontinued models often surface there. For sized-standard parts (blade, belt, brushes), a correctly measured generic replacement from Amazon or a hardware store works just as well.
Conclusion
For the Chicago Electric 63118, start with Harbor Freight’s own parts line and the manual’s exploded diagram — but expect that many components are listed for reference only, not sold individually. eBay covers the discontinued original parts; a correctly measured generic blade, belt, or brush covers the sized-standard wear items just as well as an original part would.
