DeWalt DWE7491RS Table Saw Review: Specs & Verdict
The DEWALT DWE7491RS is a 15-amp, 10-inch jobsite table saw built around a rack-and-pinion telescoping fence and a folding rolling stand — the combination that separates it from cheaper benchtop saws, which typically have neither.
What’s Actually in the Box
The DWE7491RS ships with the rolling stand, a rip fence, miter gauge, two blade wrenches, a push stick, the blade guard assembly, and a 10-inch 24-tooth carbide blade — a general-purpose blade, not a fine-finish one. It carries a 3-year limited warranty from DEWALT.
Editor’s Table Saw Pick
 |
DEWALT DWE7491RS 10" Table Saw with Rolling Stand – $599.00 This is the exact saw this review covers — a 15-amp jobsite table saw built around a rack-and-pinion fence and a rolling stand, which is what separates it from cheaper benchtop saws that skip both.
|
As an Amazon Associate we earn from qualifying purchases.
Motor and Cutting Specs
| Spec | Value |
|---|---|
| Motor | 15 amp, 4,800 RPM no-load speed |
| Rip capacity | 32-1/2″ to the right of the blade |
| Depth of cut | 3-1/8″ at 90°, 2-1/4″ at 45° |
| Table size | 21-7/8″ x 26-3/8″ |
| Dust port | 2-1/2″ diameter, connects to a shop vac or dust extractor |
| Dado capability | Yes, with stacked dado blades |
The rack-and-pinion fence is the spec that matters most for accuracy: instead of sliding along a bar and locking wherever you stop, the fence engages a geared rail, so it tracks straight and returns to the same position repeatably. That’s a feature usually reserved for cabinet saws, which is why it stands out on a saw in this price range.
Portability: The Rolling Stand
The stand is what makes this a genuine jobsite saw rather than a benchtop unit pretending to be one. It folds down with the saw’s telescoping fence rails retracted for transport, and unfolds with wheels on one side so one person can tip and roll it rather than lifting the full ~90-lb unit. For a shop that never leaves one spot, the stand is dead weight you’re paying for; for anyone moving the saw between a shop and job sites, it’s the reason to pick this model over a lighter benchtop saw without one.
Safety Features
- Riving knife: moves up and down with the blade and stays close behind it, keeping the kerf open so the workpiece can’t pinch the blade and kick back.
- Blade guard: a clear polycarbonate guard that lets you see the cut while blocking direct contact with the blade.
- Anti-kickback pawls: integrated into the guard assembly, they allow forward feed but catch the workpiece if it starts moving backward.
Where This Saw Makes Sense
The DWE7491RS is built for site work and home shops that need to break a saw down and move it — framing crews, trim carpenters, and DIYers without a dedicated shop who still want cabinet-saw-style fence accuracy. If the saw is staying in one fixed spot permanently, a cabinet or hybrid saw with more table mass and a heavier motor will outperform it on dense hardwood and large sheet goods; the DWE7491RS’s advantage is specifically that it doesn’t have to stay put.
Frequently Asked Questions
Can the DEWALT DWE7491RS use dado blades?
Yes, it accepts stacked dado blade sets for cutting grooves and rabbets, in addition to the standard 10-inch blade it ships with.
How much horsepower does the DWE7491RS have?
DEWALT rates the motor at 15 amps with a no-load speed of 4,800 RPM rather than publishing a horsepower figure, which is standard practice for jobsite table saw motors.
How many amps does the DWE7491RS draw?
15 amps, which is the maximum a standard 15-amp household circuit can handle — avoid running other tools on the same circuit at the same time.
What kind of miter slot does the DWE7491RS use?
It uses a standard T-slot miter gauge track, the same style used across most DEWALT jobsite table saws, which is what lets aftermarket miter gauges and sleds from other brands fit it.
Conclusion
The DWE7491RS earns its price by pairing a rack-and-pinion fence — usually a cabinet-saw feature — with a stand built to actually leave the shop. For anyone who needs a saw that travels, that combination is harder to find at this price than the motor spec sheet alone suggests.
