Chicago Electric 10-Inch Table Saw Parts List: Complete 69480 Guide
The Chicago Electric 10-inch table saw (model 69480) has 167 numbered replacement parts, all sourced through Harbor Freight’s online-only parts store — except discontinued motor assemblies, which surface on eBay as salvage inventory. Using the wrong part number means shipping delays on an incompatible component. This guide covers the complete 69480 numbered parts list by assembly group, which parts fail first, and how to order by part number from Harbor Freight, eBay, or Amazon.
Quick Answer
The Chicago Electric 10-inch table saw (model 69480) has 167 listed replacement parts. The most commonly replaced are the carbon brush (Part 161), the 10-inch saw blade (Part 73), and the fence cam (Part 117). Order genuine parts at harborfreight.com/parts — online only, free shipping, in-stock items ship within 48 hours.
Chicago Electric 10-Inch Table Saw: Which Model Number Is Yours?
Harbor Freight sold the Chicago Electric 10-inch table saw under at least two model numbers. Knowing your model number before ordering parts prevents receiving an incompatible component — even when the parts look identical. Check the label on the front panel or motor housing of your saw for the exact model number.
Model 69480: The 10-Inch 15A Industrial Professional Series
Model 69480 is the Chicago Electric 10-inch 15A Industrial Table Saw Professional Series — the most widely documented of the Chicago Electric 10-inch saws. Its owner’s manual (ManualsLib manual ID 874468) contains a complete 167-part numbered diagram. This is the model most people mean when they search for Chicago Electric 10-inch table saw replacement parts. It runs a 5/8-inch arbor and accepts any standard 10-inch carbide saw blade with that arbor hole diameter.
Model 63118: The 10-Inch 15A Standard Benchtop
Model 63118 is a lighter-duty benchtop version of the Chicago Electric 10-inch saw, also 15A. The Harbor Freight owner’s manual for the 63118 is available as a PDF at manuals.harborfreight.com. Parts availability for the 63118 is more limited than the 69480. If you own a Harbor Freight table saw, confirming which model number is on your machine is the first step before any parts order.
Complete Parts List for Chicago Electric 69480 Table Saw
The 69480 parts list covers 167 numbered components across six major assembly groups. The tables below organize the most replacement-relevant parts by subsystem. For the full 167-part numbered diagram, see ManualsLib manual 874468 (page 20) or search your part number at harborfreight.com/parts.
Electrical and Control Parts
| Part # | Description | Replacement Note |
|---|---|---|
| 1 | Switch (Hy18) | Replace if saw fails to start or switch sticks |
| 5 | Overload Protector | Trips on motor overload — reset or replace if motor cuts out under load |
| 7 | Switch Box | Outer housing for the switch assembly |
| 16 | Power Cord | Replace if insulation is frayed, cracked, or cut |
| 160 | Brush Holder Cap | Removable cap for inspecting motor brushes |
| 161 | Carbon Brush | Most common wear item; inspect every 80-100 hours of use |
| 162 | Brush Holder | Replace if cracked or visible arcing on the brush contact surface |
Blade and Arbor Assembly Parts
| Part # | Description | Replacement Note |
|---|---|---|
| 71 | Retaining Ring (O45) | Holds arbor assembly in the housing |
| 72 | Inner Flange | Holds blade on arbor shaft — replace if bent or worn |
| 73 | Saw Blade | Standard 10-in., 5/8-in. arbor; any 10-in. carbide blade fits |
| 74 | Outer Flange | Secures blade; inspect threads when replacing blade |
| 75 | Blade Nut | Left-hand thread — loosen clockwise (opposite of normal) |
Safety Components
| Part # | Description | Replacement Note |
|---|---|---|
| 88 | Riving Knife | Replace immediately if bent — prevents binding and kickback |
| 99 | Table Insert (Throat Plate) | Replace when cracked or no longer sits flush with the table surface |
| 100 | Anti-Kickback Pawl | Replace if teeth worn or pawl spring broken |
| 103 | Double Twist Spring | Keeps anti-kickback pawl engaged against the workpiece |
| 137 | Blade Guard | Clear cover over blade; replace if cracked or visibly cloudy |
Fence System Parts
| Part # | Description | Replacement Note |
|---|---|---|
| 110 | Fence Handle | Cam-lock lever for fence engagement |
| 112 | Fence Guide | Slides on the front rail; replace if binding or bent |
| 117 | Cam | Locks fence position — common failure point on older saws |
| 121 | Fence | Main rip fence body |
| 128 | Miter Gauge | Cross-cut guide with adjustable angle stop |
| 133 | Miter Gauge Guide | Bar that slides in the miter slot |
Height Adjustment Parts
| Part # | Description | Replacement Note |
|---|---|---|
| 27 | Rack | Gear rack for blade height adjustment |
| 29 | Height Handle | Crank for raising and lowering the blade |
| 32 | Height Wheel | External wheel that drives blade height adjustment |
| 35 | Height Bar | Threaded rod in height adjustment mechanism |
| 53 | Lock Knob | Fixes the bevel angle; replace if stripped or cracked |
Motor Assembly Parts
| Part # | Description | Replacement Note |
|---|---|---|
| 148 | 6003 Bearing | Output shaft front bearing |
| 154 | HK1210 Roller Bearing | Armature support bearing |
| 157 | 6202 Bearing | Motor end plate bearing |
| 161 | Carbon Brush | Replace when worn to under 1/4-in. length — replace both at once |
| 164 | Stator | Motor field winding — major repair; check eBay for used parts |
| 165 | Rotor | Motor armature — major repair; rarely cost-effective to replace |
| 166 | 629 Bearing | Rear motor bearing |
Parts That Fail First on Chicago Electric 10-Inch Table Saws
Based on the 69480 parts diagram and documented owner repair reports, five components account for most replacement orders on Chicago Electric 10-inch table saws:
- Carbon Brush (Part 161): The most frequently replaced part. Brushes wear down at roughly 80-100 hours of runtime. When the saw loses power under load or sparks are visible through the brush cap vent, it is time to inspect. Replace both brushes at the same time — replacing only one causes uneven wear.
- Saw Blade (Part 73): Standard 10-inch, 5/8-inch arbor blade dulls with normal use. Replace when the saw requires noticeably more feed force or scorch marks appear on the cut face. Any 10-inch carbide-tipped blade with a 5/8-inch arbor hole is a direct fit.
- Fence Cam (Part 117): The cam that locks the rip fence loosens with repeated use. A fence that drifts after locking usually has a worn or cracked cam. This is an inexpensive part that restores accurate fence lock when replaced.
- Switch (Part 1): Table saw switches absorb significant vibration over the tool’s life. If the saw fails to start or the switch sticks in the on position, the Hy18 switch is the first component to test.
- Anti-Kickback Pawls (Part 100): The spring-loaded teeth that prevent kickback flatten with heavy use. Replace when the teeth no longer grip the workpiece cleanly or when the pawl spring (Part 103) breaks.
“In our shop, carbon brushes on Harbor Freight benchtop table saws showed measurable wear after 80-100 hours of runtime. Inspect the brushes after every 10 full sheets of plywood. A worn brush causes the motor to run rough before it causes an outright stall — catching it early prevents a mid-cut shutdown.”
Best Replacement Blade Pick
DEWALT Table Saw Blade, 10-Inch 40-Tooth
A 40-tooth carbide-tipped blade that fits the Chicago Electric 69480 and 63118 directly — standard 5/8-in. arbor, 10-in. diameter. Handles both ripping and crosscutting on dimensional lumber and sheet goods.
- Best for: General-purpose cuts on lumber and plywood (Part 73 direct replacement)
- Why we picked it: 5/8-in. arbor matches both Chicago Electric 10-in. models; carbide tips outlast standard steel blades
- Main drawback: 40T not ideal for very fine finish cuts on hardwood — use 60T or higher for those
Compare more table saw replacement part options
 Option 1 Carbon Motor Brushes (17x6x6mm, 20-pack)
|
 Option 2 POWERTEC Universal Featherboards (Pair)
|
 Option 3 POWERTEC Push Block and Push Stick Set
|
As an Amazon Associate we earn from qualifying purchases.
Where to Order Chicago Electric 10-Inch Table Saw Replacement Parts
Harbor Freight Online Parts Store (Primary Source)
Harbor Freight’s replacement parts portal at harborfreight.com/parts is the primary source for genuine Chicago Electric components. All parts ship free, and in-stock items dispatch within 48 hours. Parts are online-only — they are not stocked at physical Harbor Freight stores. Navigate to harborfreight.com/parts, select “Chicago Electric Power Tools” from the brand dropdown, filter by tool category, and enter your part number. The limit is five units of the same part per order; defective parts under warranty require a call to 1-800-444-3353.
eBay (For Discontinued and Hard-to-Find Parts)
For parts that Harbor Freight no longer stocks — most commonly the motor stator (Part 164), rotor (Part 165), and bearings (Parts 148, 154, 157, 166) — eBay is the best secondary source. Search for “Chicago Electric 69480” or “Chicago Electric table saw [part name]”. Motor brushes and blade guards are frequently listed by sellers who parted out non-working saws. Always confirm the model number matches before purchasing a used part.
Amazon (For Generic Replacement Parts)
For generic-fit parts — the 10-inch blade (any 5/8-inch arbor carbide blade fits as a direct Part 73 replacement), motor brushes (standard 17x6x6mm brushes match the 69480 motor in most cases), push sticks (Part 139), and featherboards — Amazon offers same-day or next-day availability that Harbor Freight’s parts store cannot match. These are not Chicago Electric branded parts, but they are functionally compatible replacements for the most commonly needed items.
| Part Type | Best Source | Typical Lead Time |
|---|---|---|
| Blade (Part 73), Push Stick (Part 139), Carbon Brush (Part 161) | Amazon | 1-2 days |
| Switch (Part 1), Fence parts, Safety components | Harbor Freight Parts (online) | 2-5 days (free ship) |
| Motor assemblies (Stator 164, Rotor 165), Bearings | eBay (used/salvage) | 3-10 days |
| Full parts diagram | ManualsLib manual 874468 | Free, immediate PDF |
Core Components of the Chicago Electric 10-Inch Table Saw
Tabletop and Throat Plate
The tabletop provides the flat cutting surface, and the throat plate (table insert, Part 99 in the 69480 list) covers the slot around the blade. The throat plate must sit flush with the table surface — if it sits proud of the table, it creates a lip that catches workpieces mid-cut. Replace the throat plate if it is cracked, warped, or no longer locks flush. It is a low-cost part and a common cause of cut accuracy problems that gets overlooked during troubleshooting.
Blade and Arbor Mechanics
The arbor is the shaft that holds the blade. The Chicago Electric 69480 uses a 5/8-inch arbor — the most common size for 10-inch table saws. The arbor nut (Part 75) uses left-hand thread, meaning it tightens counterclockwise and loosens clockwise — opposite of standard fasteners. A common beginner mistake is trying to loosen the nut in the standard direction, overtightening instead of removing it. The inner flange (Part 72) and outer flange (Part 74) sandwich the blade; inspect both for damage whenever you replace the blade.
Maintenance and Tuning
Regular maintenance extends the life of the parts that fail most often. Two areas matter most: keeping moving parts clean and lubricated, and keeping the blade aligned to the miter slot.
Cleaning and Lubrication
- Clean the tabletop after each session — sawdust packed around the fence rail accelerates wear on the fence guide (Part 112) and cam (Part 117).
- Apply light machine oil to the trunnions, height adjustment rack (Part 27), and height wheel shaft every 20-25 hours of use.
- Blow out the motor vents with compressed air to clear sawdust from the carbon brush area — accumulated sawdust in the motor housing shortens brush life and causes the overload protector (Part 5) to trip more frequently.
Blade Alignment and Bevel Stops
- Unplug the saw before any alignment work.
- Use a machinist’s square against the blade body (not the teeth) and the miter slot to check for parallelism.
- Adjust the trunnion bolts if the blade is not parallel to the miter slot. Even a 1/32-inch variance causes burning on rip cuts.
- Check bevel stops at 0 degrees and 45 degrees after any alignment work.
- Replace the blade (Part 73) when alignment is correct but cuts still feel rough — the problem is blade dullness, not setup.
DIY Troubleshooting and Repairs
Most Chicago Electric 10-inch table saw problems trace back to one of four causes. Here are the common issues with specific fixes tied to the 69480 parts list:
- Blade not cutting straight (binding or veering): Unplug the saw. Check blade alignment to the miter slot using a straight edge. Loosen the arbor nut (Part 75 — clockwise to loosen), adjust blade position, and retighten. Also check that the riving knife (Part 88) is centered directly behind the blade.
- Motor cuts out under load or runs slow: Check the carbon brushes (Part 161) through the brush caps (Part 160). If brushes are worn to less than 1/4-inch, replace both. Also check the overload protector (Part 5) — it may have tripped and needs a reset before the motor will run.
- Fence drifts after locking: The fence cam (Part 117) is the most likely cause. Inspect the cam for wear or cracking. Clean the fence rail and apply a thin coat of paste wax — debris in the rail causes the cam to lock inconsistently even when it is not yet worn.
- Rust on the tabletop: Remove rust with a non-scratch abrasive pad and rust remover, then apply paste wax. A rusted tabletop increases feed resistance and causes workpieces to stick mid-cut, which increases kickback risk.
Safety Features of the Chicago Electric 10-Inch Table Saw
The 69480 ships with four safety components that must be in working condition for safe operation. All four are separate numbered replacement parts in the official parts list:
Blade Guard (Part 137)
The blade guard is a clear plastic cover that surrounds the blade during a cut. It allows the operator to see the cut line while keeping hands clear of the blade and deflecting ejected debris. Replace the blade guard if it is cracked, cloudy, or no longer locks securely to the guard mount. Operating without the blade guard is legal but significantly increases the risk of blade contact and debris injury.
Riving Knife (Part 88) and Anti-Kickback Pawls (Part 100)
The riving knife is a vertical steel plate directly behind the blade that keeps the kerf open as the workpiece moves through, preventing the cut from closing on the blade and causing kickback. The anti-kickback pawls are spring-loaded teeth (powered by Part 103, the double twist spring) that grip the workpiece if it starts moving backward toward the operator. A bent riving knife or broken pawl spring makes the other component less effective. Replace either part at the first sign of damage — these are two of the least expensive parts in the 69480 list and among the most important for operator safety.
Frequently Asked Questions
What parts wear out first on a Chicago Electric 10-inch table saw?
Carbon brushes (Part 161) wear out first on the Chicago Electric 69480, typically after 80-100 hours of runtime. The saw blade (Part 73) dulls with normal use depending on material and feed rate. The fence cam (Part 117) loosens over time, causing the rip fence to drift after locking. The overload protector (Part 5) and switch (Part 1) can fail on older saws. Anti-kickback pawls (Part 100) flatten with heavy use. Inspect carbon brushes after every 10 full sheets of plywood and replace them in pairs when worn to under 1/4-inch.
Where can I order replacement parts for the Chicago Electric 69480?
Harbor Freight’s online parts store at harborfreight.com/parts is the primary source for Chicago Electric 69480 replacement parts. All parts ship free, and in-stock items ship within 48 hours. The store is online-only — parts are not available at physical Harbor Freight locations. For discontinued parts, especially motor components (stator Part 164, rotor Part 165) and bearings, check eBay for salvage inventory. Generic-fit parts like replacement blades and carbon motor brushes are also available on Amazon with faster shipping.
Are Chicago Electric table saw parts still available?
As of 2026, some parts for the 69480 and 63118 models are still listed on Harbor Freight’s online parts portal. Common replacement items — carbon brushes, blade guards, fence components, and throat plates — are generally in stock. Motor assemblies (stator, rotor) and bearings may be discontinued and only available as used or salvage parts on eBay. Chicago Electric is a Harbor Freight house brand, so parts availability depends entirely on what Harbor Freight currently stocks. Call 1-800-444-3353 to confirm availability before ordering a critical component.
What model number is the Chicago Electric 10-inch table saw?
The main Chicago Electric 10-inch table saw models sold by Harbor Freight were the 69480 (10-in. 15A Industrial Professional Series) and the 63118 (10-in. 15A Standard Benchtop). Both use a 5/8-inch arbor. The 69480 has the most complete documentation — a full 167-part list is available on ManualsLib (manual ID 874468, page 20). Check the label on the motor housing or front panel of your saw for the exact model number before ordering any replacement part.
Can I use a universal 10-inch blade on my Chicago Electric table saw?
Yes. The Chicago Electric 10-inch table saw (models 69480 and 63118) uses a standard 5/8-inch arbor. Any 10-inch carbide-tipped saw blade with a 5/8-inch arbor hole fits directly — including aftermarket blades from DEWALT, Diablo, CRAFTSMAN, or Freud. A 40-tooth general-purpose blade handles ripping and crosscutting on dimensional lumber and sheet goods. A 60-tooth or higher blade delivers cleaner results on hardwood finish cuts. You are not limited to Chicago Electric branded blades.
Keeping the Chicago Electric 69480 running reliably comes down to three habits: replacing carbon brushes (Part 161) before they wear out completely, keeping the fence cam (Part 117) clean so the rip fence locks consistently, and aligning the blade to the miter slot whenever cuts start to bind. For any part not in stock at Harbor Freight, eBay and Amazon carry compatible replacements that keep the saw in service without a full tool replacement.
